Why do so many people regret the fridge finish they picked?\nYou stand in a bright showroom, fall for a sleek “black” door, and only later discover it shows every fingerprint, won’t take a magnet, or needs special cleaners. It’s a common story. Emma in Tauranga loved her black‑glass French door. A week in, she was polishing twice a day and grumbling that the school notices had nowhere to live (glass isn’t magnetic) [harveynorman.co.nz; mitsubishielectric.com.au].

\n\n

\n \n

High‑gloss and glass doors reveal prints quickly; test cleaning before you buy.

\n \n\n

Here’s the twist: finish isn’t just colour. It’s a material system that decides day‑to‑day cleaning, magnet friendliness, lighting reflections, even how easy it is to repair or install. Some “black stainless” is a tinted coating over steel that can scratch/peel and may be treated as “cosmetic” by brands, and integrated fridges need real ventilation planning (often 200 cm² top and bottom for Liebherr) [consumerreports.org; us.community.samsung.com; home.liebherr.com].

\n\n

What should you really be comparing instead of just “colour”?

\n\n

The biggest misconception is that finish is a style choice. In practice, it’s a lifestyle choice. Think of it like choosing flooring: polished concrete, timber, and carpet all look great-until you live with pets, wet shoes, and kids.

\n\n

What’s the cleaning regime and what’s excluded under the finish warranty (e.g., peeling on black stainless)? [consumerreports.org; us.community.samsung.com]
Will this surface accept magnets where I need them (glass and some coated stainless often don’t)? [choice.com.au]
How will this finish look under my daylight and warm LEDs after a week of fingerprints and cooking? [choice.com.au]

\n\n

What do the numbers and real owners say?

\n\n

Black stainless is typically a polymer/acrylic tinted topcoat on steel; owners report visible scratches/peel that reveal bright steel, with repairs hard and sometimes excluded as “cosmetic” [consumerreports.org; us.community.samsung.com; bobvila.com].
Glass door panels (Mitsubishi “Brilliant/Diamond Black,” F&P Black Glass) are non‑magnetic; owners of black glass frequently report prints/streaks and constant wiping, even though brands market easy cleaning [mitsubishielectric.com.au; harveynorman.co.nz].
Integrated/panel‑ready needs correct venting; Liebherr calls for around 200 cm² top and bottom, with poor venting linked to efficiency loss, condensation, cabinet damage, and shortened compressor life [home.liebherr.com; andico.com.au].
“Satina” and many “Silver” finishes are stainless‑look coatings, not real stainless-often better at hiding marks and cheaper, but don’t always match true stainless next to them [harveynorman.co.nz; westinghouse.com.au].
CHOICE notes fingerprint‑resistant/matte stainless hides smudges better; white remains the easiest “clean‑looking” and cheapest in many lineups. Coated “smudge‑proof” stainless may be less magnet‑friendly [choice.com.au].

\n\n

Costs to you: time lost wiping (daily for black glass in busy homes), the frustration of non‑magnetic doors, mismatched metals across brands, and-at worst-cabinet repairs on tight integrated installs.

\n\n

How does the wrong finish feel day to day?

\n\n

Picture a busy Monday. You’re packing lunches, the cat’s weaving around your feet, and you touch the fridge twenty times before 8 a.m. On glossy stainless or black glass, every touch blooms into prints under your downlight. You wipe. Streaks appear. You wipe again.

\n\n

\n \n

Magnets stick to painted steel; many glass fronts are non‑magnetic.

\n \n\n

Sam in Brisbane bought a black stainless suite to match dark cabinetry. A year later, micro‑scratches around the handles caught the morning sun. The manufacturer called it “cosmetic.” He started babying the doors, asking guests not to lean on the fridge-until the kitchen felt like a museum, not a home [consumerreports.org; us.community.samsung.com]. By contrast, his rental’s white top‑mount looked plain, but it shrugged off daily use and never clashed with magnets or cleaners [choice.com.au].

\n\n

What’s a smarter way to choose a finish?

\n\n

Use the MATCH framework:

\n\n

M Magnets: Do you actually need a magnetic surface? If yes, avoid glass and test coated stainless in‑store [choice.com.au].
A Aftercare and warranty: Is it a coating (black stainless, Satina, Silver)? Which cleaners are approved? Is finish damage covered? [consumerreports.org; westinghouse.com.au]
T Tone and lighting: Dark doors absorb light and can visually shrink small kitchens; glass can glare under pendants. Check in your lighting, not just the showroom [choice.com.au; mitsubishielectric.com.au].
C Cabinet/installation: For integrated, confirm vent areas, panel weight, hinge limits, and service access before cabinetry is built [home.liebherr.com; andico.com.au].
H Hardiness: How does it handle fingerprints, scratches, and dents? Thin stainless can dent; black stainless highlights scratches; glass resists dents but shows smears [bobvila.com; reddit.com/r/Appliances; mitsubishielectric.com.au].

\n\n

Take this into stores: bring a microfibre cloth and a magnet, and ask sales staff to show cleaning and magnet behaviour on the exact finish you’re considering.

\n\n

So, which finish should you pick-and how do you buy it right?

\n\n

\n Step 1: Shortlist by how you live.\n
- Need magnets? Favour white, true stainless (check), Satina/silver sides; avoid glass and be cautious with fingerprint‑resistant coatings [choice.com.au].
- Hate wiping? Look at fingerprint‑resistant/matte stainless or Satina; avoid glossy stainless and black glass in high‑touch zones [choice.com.au; harveynorman.co.nz].
- Seamless look? Consider integrated/panel‑ready-budget for proper ventilation and cabinet work [home.liebherr.com].
\n
\n Step 2: Know what each finish actually is in AU/NZ (synonyms + availability).\n
- Black: Black/dark stainless (tinted coating on steel), matte black paint/laminate, or black glass panels. Available from Westinghouse (Dark Stainless), F&P (Black Stainless), Mitsubishi Electric (Brilliant/Diamond Black glass) [westinghouse.com.au; harveynorman.co.nz; mitsubishielectric.com.au]. When to choose: dark kitchens seeking drama; accept careful cleaning and scratch risk on coated metals [bobvila.com].
- Glass: Tempered glass skins in black/white/silver; Samsung Bespoke uses coloured/satin glass panels. Sleek, wipeable, non‑magnetic; black glass can show streaks [mitsubishielectric.com.au; harveynorman.co.nz; reddit.com/r/Appliances]. When to choose: minimalist, handle‑less kitchens where magnets aren’t needed.
- Integrated/panel‑ready: Fully built‑in behind cabinetry from F&P, Liebherr, Bosch. Stunning when done right; installation and venting are critical [harveynorman.co.nz; home.liebherr.com]. When to choose: design‑led or small spaces; allow budget and a skilled installer.
- Satin/Satina: Stainless‑look, fingerprint‑resistant paint/foil; common on Haier NZ, similar “anti‑fingerprint” from LG AU [harveynorman.co.nz; lg.com]. When to choose: value projects and rentals wanting low‑care metallic looks.
- Silver: “Stainless look” paint/laminate; Westinghouse often labels as Silver/Vibrant Silver with “stainless steel look” cabinets [westinghouse.com.au]. When to choose: metallic vibe without stainless upkeep; keep the suite to one brand to avoid mismatches.
- Stainless (natural): Brushed or glossy metal; also in “fingerprint‑resistant/matte” versions across lines [westinghouse.com.au; choice.com.au]. When to choose: classic look, broad model choice; pick smudge‑proof if you dislike polishing and test magnetism.
- White: Enamelled white metal; still widely sold and often cheaper/easier to keep “clean‑looking” [choice.com.au]. When to choose: rentals, second fridges, bright coastal/Scandi kitchens.
- Other colours: Smeg retro hues; Samsung Bespoke coloured glass; Mitsubishi Argent/Dark Silver/Glacier White glass [homesandgardens.com; mitsubishielectric.com.au]. When to choose: design statement with eyes open to cost/availability and potential trend risk [choice.com.au].
\n
\n Step 3: Pressure‑test in person.\n
- View the exact finish next to your benchtop/cabinet sample under cool and warm lighting; dark doors can visually shrink small rooms [choice.com.au].
- Do the wipe test with a microfibre and your normal cleaner; confirm approved products for coatings [consumerreports.org].
- Magnet test the exact door skin; sides are often painted steel and more magnet‑friendly than some coated fronts [choice.com.au].
- For integrated: lock in vent size (e.g., ~200 cm² top/bottom for Liebherr), panel thickness/weight and hinge limits before the joiner cuts a single panel [home.liebherr.com; andico.com.au].
\n
\n Step 4: Make the call using this quick selector.\n
- Lowest fingerprints: Fingerprint‑resistant/matte stainless; Satina [choice.com.au; harveynorman.co.nz].
- Most magnet‑friendly: True stainless and painted steel sides; not glass; coated “smudge‑proof” fronts vary-test [choice.com.au].
- Hardiest against dents: Glass resists dents; thin stainless can dent; black stainless highlights scratches if coating is breached [bobvila.com; reddit.com/r/Appliances].
- Best budget bets: White and painted Silver/Satina; integrated and glass panels add cost [choice.com.au].
\n

\n\n

AU/NZ model examples if you want to start browsing

\n\n

Black/dark stainless: Westinghouse WHE6170BB; F&P RF500QNB1 [westinghouse.com.au; harveynorman.co.nz].
Black glass: F&P RF605QZUVB1/RF730QZUVB1; Mitsubishi “Brilliant Black” LX [harveynorman.co.nz; mitsubishielectric.com.au].
Integrated: F&P RS90A1/RS7621; multiple Liebherr/Bosch built‑ins [harveynorman.co.nz; home.liebherr.com].
Satina/silver‑look: Haier HRF510FS/HRF346BS; Westinghouse WQE5660SA/WQE4960AA [harveynorman.co.nz; westinghouse.com.au].
Fingerprint‑resistant stainless: Westinghouse WHE6200SA; LG GB‑306NP anti‑fingerprint [westinghouse.com.au; lg.com].
White: Mitsubishi Glacier White glass; standard white lines across brands per CHOICE [mitsubishielectric.com.au; choice.com.au].
Colour: Smeg retro; Samsung Bespoke coloured glass (mixed owner sentiment) [homesandgardens.com; reddit.com/r/Appliances].

\n\n

Bring the MATCH checklist, a magnet, and a cloth to the showroom. Ask about finish warranty, approved cleaners, and-in the case of integrated-ventilation and panel specs. Choose for how you live, not just how it looks under store lights, and you’ll love your fridge on day 1 and day 1,000.

\n\n

Choose for how you live, not just how it looks under store lights, and you’ll love your fridge on day 1 and day 1,000.

Fridge Finish Guide - Pick One You’ll Love